Carrier-access Multi-Service Router (MSR) Card MSR/Adit 3K GUI Manual de usuario Pagina 92

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 262
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 91
2-56 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Advanced
Simple Network Management Protocol
3. Set the Trusted Peer. This is the IP address and subnet that identifies which remote
management stations are allowed to perform SNMP operation on the Adit.
4. Enable the SNMP Traps, if desired. Traps are messages sent by the Adit to a remote
management station notifying the manager about important events or serious conditions. When
SNMP traps are enabled, the fields expand.
Field Definition
Any Address No restriction to remote access.
Specify an IP Address Requires an IP address.
Specify a Subnet Requires an IP address and Subnet.
Field Definition
Enable Check to enable the SNMP traps.
Version SNMP v1- SNMP version 1
SNMP v2c - SNMP version 2C
Destination Enter the Destination IP address.
Community Enter a community string (a password that allows access to a network device).
Vista de pagina 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 261 262

Comentarios a estos manuales

Sin comentarios