Carrier-access Terminal Server Router Manual de usuario descargar pdf (Pagina 12)

12 Terminal Service Router - Release 1.3

Quick Start Guide

Back-to-Back with PPP

Denver Router in Slot 1

Command Description

set 1 default Set Router to default settings

disconnect a:1 Disconnect all connections to the T1 on the

Controller (slot a)

disconnect 1 Disconnect all connections to the router in slot 1

set clock1 a:1 Set primary master transmit clock source

set a:1:all type data Set the T1-1 of the Controller, Type to Data

connect a:1:all 1:1:1 Connect all of T1-1 to the Router that is in slot 1

rename 1 "LocalUnit" "Denver" Rename the Axxius 800 from "LocalUnit"

(default) to "Denver" (LAN)

rename 1 "RemoteUnit" "wan1" Rename WAN #1 from "RemoteUnit" (default) to

"wan1"

set 1:1 ip address 2.2.2.1

255.255.255.0

Set the ethernet IP address, in the conventional IP

address format. (Router LAN)

set 1:1 phy auto Set the Physical Specifications to auto-negotiate

add 1 "wan1" static ip network

1.1.1.0 255.255.255.0 1

Adds a static IP network (route) to the WAN

interface

set 1 "wan1" trunk 1 Set the WAN interface named "wan1" to be

mapped to trunk 1

reset 1 Reboot the router, to enable all configurations set

1 2 ... 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Carrier-access Terminal Server Router Manual de usuario Pagina 12