Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario descargar pdf (Pagina 151)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-25

Global Configuration Mode

Global Configuration Commands

ip dhcp pool ethernet

Use the ip dhcp pool ethernet command to allow access to the DHCP configuration commands. See

Chapter 7, Configuration - DHCP Pool Ethernet Mode for commands in this mode. For the no

counterpart, see no ip dhcp pool ethernet command on page 4-43.

Syntax: (config)# ip dhcp pool ethernet port

Example: (config)# ip dhcp pool ethernet 1

(config-dhcp-eth-1)#

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

ip domain-name

Use the ip domain-name command to sets system domain name.

Syntax: (config)# ip domain-name name

Example: (config)# ip domain-name mydomain.com

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

ip host

Use the ip host command to set the host name for this device.

Syntax: (config)# ip host hostname

Example: (config)# ip host gateway1

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

port Selects the Ethernet port to configure. Range is 1-2.

Field Definition

name Enter the domain name of the device.

Field Definition

hostname Enter the name of the host. Default is adit3500, adit3104, or aditMSR

(depending on the platform).

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 495 496

Comentarios a estos manuales

Sin comentarios

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario Pagina 151

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca