Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario descargar pdf (Pagina 187)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-61

Global Configuration Mode

Global Configuration Commands

snmp-server host

Use the snmp-server host command to set a SNMP host.

Syntax: (config)# snmp-server host address {community

community-name|version {1|2c}

Example: (config)# snmp-server host 192.168.1.1 version 1

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

snmp-server traps enable

Use the snmp-server traps enable command to enable SNMP traps on the system. To delete a

SNMP server trap, see no snmp-server traps command on page 4-50.

Syntax: (config)# snmp-server traps enable

Example: (config)# snmp-server traps enable

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

snmp-server trusted-ip

Use the snmp-server trusted-ip command to set a SNMP trusted peer (The IP address, or subnet

address that identifies which remote management stations are allowed to perform SNMP

operations).

Syntax: (config)# snmp-server trusted-ip {address|any}

[trusted-mask mask]

Example: (config)# snmp-server trusted ip any

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

address Enter an destination IP address.

community-name Enter the SNMP community name.

version 1 - SNMPv1

2c - SNMPv2c

Field Definition

address Enter an IP address of a trusted peer.

any Allow any IP address trusted peer access.

trusted-mask mask This is an optional parameter, enter the subnet mask of the trusted peer

IP address.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 495 496

Comentarios a estos manuales

Sin comentarios

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario Pagina 187

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca