Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario descargar pdf (Pagina 405)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 18-3

Configuration - PPTPS Mode

end

Use the end command to exit the current configuration mode, and must be used to mark the end of any

configuration file. This command can be entered in any configuration mode with the same result.

Syntax: (config-pptps)# end

Example: (config-pptps)# end

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

end-address

Use the PPTP Server end-address command to set the PPTP remote host IP address range end.

Syntax: (config-pptps)# end-address end-ip-address

Example: (config-pptps)# end-address 192.168.1.250

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

exit

Use the exit command to close your current connection if you are in the User mode, or Privileged mode.

If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you

to the next higher level (example: back to Privileged mode from Interface configuration mode).

Syntax: (config-pptps)# exit

Example: (config-pptps)# exit

(config)#

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

end-ip-address Enter the end IP address of the range.

1 2 ... 400 401 402 403 404 405 406 407 408 409 410 ... 495 496

Comentarios a estos manuales

Sin comentarios

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario Pagina 405

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca