Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario descargar pdf (Pagina 216)

100

101

7-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - DHCP Pool Ethernet Mode

option

Use the option command to configure DHCP options per RFC 2132. To delete an option, see no option

command on page 7-5.

Syntax: (config-dhcp-eth-{n})# option {66 {enable|value

{address|hostname}|67 {enable|value filename}

Example: (config-dhcp-eth-1)# option value 66 10.10.5.100

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

relay

Use the DHCP Pool relay command to configure DHCP relay. The DHCP relay is responsible for

forwarding the requests and responses negotiating between the DHCP clients and the server. To delete

DHCP relay, see no relay command on page 7-5.

Syntax: (config-dhcp-eth-{n})# relay address1 [address2] [address3] ...

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

66 66 - Send the TFTP server name.

address - Enter the IP address of the TFTP server.

hostname - Enter the host name of the TFTP server.

67 67 - Send the Boot file name.

filename - Enter the boot file name.

enable To enable the DHCP option.

Field Definition

address The DHCP relay IP address, in the form of xxx.xxx.xxx.xxx, where

xxx is between 0-255

address1, address 2,

...

Optional address parameter, to enter additional DHCP relay IP

addresses, in the form of xxx.xxx.xxx.xxx, where xxx is between

0-255

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 495 496

Comentarios a estos manuales

Sin comentarios

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario Pagina 216

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca