Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario descargar pdf (Pagina 258)

100

101

11-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - Ethernet Interface Mode

ip rip

ip rip enable

Use the Ethernet Interface ip rip enable command to enable RIP on this interface. To disable RIP,

see no ip rip command on page 11-21.

Syntax: (config-int-eth-{n})# ip rip enable

Example: (config-int-eth-1)# ip rip enable

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

ip rip receive-version

Use the Ethernet Interface ip rip receive-version command to configure the RIP receive messages

on this interface.

Syntax: (config-int-eth-{n})# ip rip receive-version {1|2|1or2|none}

Example: (config-int-eth-1)# ip rip receive-version none

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

ip rip send-version

Use the Ethernet Interface ip rip send-version command to configure the send RIP messages on this

interface.

Syntax: (config-int-eth-{n})# ip rip send-version {1|2-bcast|

2-mcast|none}

Example: (config-int-eth-1)# ip rip send-version 2-bcast

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

1 Receive RIP version 1

2 Receive RIP version 2

1or2 Receive RIP version 1 and 2.

none Set RIP version to none.

Field Definition

1 Send RIP version 1.

2-bcast Send RIP version 2 - Broadcast.

2-mcast Send RIP version 2 - Multicast.

none Set send RIP version to none.

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 495 496

Comentarios a estos manuales

Sin comentarios

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario Pagina 258

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca