Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario Pagina 280

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 496
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 279
12-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Multilink Interface Mode
ip ospf priority
Use the Multilink Interface ip ospf priority command to set the router priority, which determines the
designated router for this network. To restore the default setting of priority 1, see no ip ospf priority
command on page 12-16.
Syntax: (config-int-mlink-{n})# ip ospf priority priority
Example: (config-int-mlink-1)# ip ospf priority 2
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ip ospf retransmit-interval
Use the Multilink Interface ip ospf retransmit-interval command to define the interval of time
between link state advertisement retransmissions for adjacencies belonging to the interface. To restore
the default value of 5 seconds, see no ip ospf retransmit-interval command on page 12-17.
Syntax: (config-int-mlink-{n})# ip ospf retransmit-interval seconds
Example: (config-int-mlink-1)# ip ospf retransmit-interval 10
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ip ospf transmit-delay
Use the Multilink Interface ip ospf transmit-delay command to define the estimated time to transmit a
link state update packet on the interface. To restore the default value of 1 second, see no ip ospf transmit-
delay command on page 12-17.
Syntax: (config-int-mlink-{n})# ip ospf transmit-delay seconds
Example: (config-int-mlink-1)# ip ospf retransmit-interval 10
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
priority Enter an ID for this key. Range is 0-255.
Field Definition
seconds Range is 1-65535 seconds, with a default of 5.
Field Definition
seconds Range is 1-65535 seconds, with a default of 1.
Vista de pagina 279
1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 495 496

Comentarios a estos manuales

Sin comentarios