Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario descargar pdf (Pagina 326)

100

101

14-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - IPSec Mode

group

Use the IPSec group command to define the Diffie-Hellman (DH) group identifier for phase-1.

Note: More than one group can be enabled. To disable a DH identifier, see no group command on

page 14-13.

Syntax: (config-ipsec {n})# group {1|2|5}

Example: (config-ipsec-1)# group 1

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

hash

Use the IPSec hash command to specify a hash algorithm. To disable a hash algorithm, see no hash

command on page 14-14.

Syntax: (config-ipsec {n})# hash {md5|sha}

Example: (config-ipsec-1)# hash md5

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

1 Set to DH group 1 (768 bit).

2 Set to DH group 2 (1024 bit). Default is enabled.

5 Set to DH group 25 (1536 bit). Default is enabled.

Field Definition

md5 Set to allow peers to use MD5.

sha Set to allow peers to use SHA1. SHA = Secure Hash Algorithm.

1 2 ... 321 322 323 324 325 326 327 328 329 330 331 ... 495 496

Comentarios a estos manuales

Sin comentarios

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario Pagina 326

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca