Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario Pagina 440

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 496
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 439
23-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Voice Port FXS Mode
echo-cancel
Use the Voice Port FXS echo-cancel command to enable Echo Cancellation on this trunk. To to disable
Echo Cancellation, see no echo-cancel command on page 23-6
Syntax: (config-vport-fxs-{n})# echo-cancel enable
Example: (config-vport-fxs-1)# echo-cancel enable
Supported Platforms:
Adit 3104, Adit 3500, MSR
end
Use the end command to exit the current configuration mode, and must be used to mark the end of any
configuration file.
Syntax: (config-vport-fxs-{n})# end
Example: (config-vport-fxs-1)# end
#
Supported Platforms:
Adit 3104, Adit 3500, MSR
exit
Use the exit command to close your current connection if you are in the User mode, or Privileged mode.
If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you
to the next higher level (example: back to Privileged mode from Interface configuration mode).
Syntax: (config-vport-fxs-{n})# exit
Example: (config-vport-fxs-1)# exit
(config)#
Supported Platforms:
Adit 3104, Adit 3500, MSR
Vista de pagina 439
1 2 ... 435 436 437 438 439 440 441 442 443 444 445 ... 495 496

Comentarios a estos manuales

Sin comentarios