Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Manual de usuario Pagina 318

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 496
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 317
13-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Serial Interface Mode
ppp link-fragmentation
Use the Serial Interface ppp link-fragmentation command to configure the threshold byte size of the
packet, for Interleaving. Note: If the packet is > the set threshold, the packet will be split in half and
sent.
Syntax: (config-int-ser-{n})# ppp link-fragmentation number
Example: (config-int-ser-1)# ppp link-fragmentation 600
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp on-demand
Use the Serial Interface ppp on-demand command to enable on demand the feature. On demand
attempts to connect only when packets are sent. To disable PPP on demand, see no ppp encryption
command on page 13-19.
Syntax: (config-int-ser-{n})# ppp on-demand
Example: (config-int-ser-1)# ppp on-demand
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ppp password
Use the Serial Interface ppp password command set the PPP password. To delete a PPP password, see
no ppp password command on page 13-19.
Syntax: (config-int-ser-{n})# ppp password password
Example: (config-int-ser-1)# ppp username test-user-pswrd
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field Definition
number Range 320 - 1600, with a default of 1600 bytes.
Field Definition
password Enter the PPP password, with a maximum of 19 characters.
Vista de pagina 317
1 2 ... 313 314 315 316 317 318 319 320 321 322 323 ... 495 496

Comentarios a estos manuales

Sin comentarios