Carrier Access Network Device Axxius 800 Manual de usuario descargar pdf (Pagina 175)

100

101

Axxius 800 - Release 2.2 5-75

CLI Commands

set

set clock (1 and 2)

Use the set clock (1 and 2) command to set the master transmit clock. The primary master clock

source may be used to clock each DS1 transmitter. The clock circuit automatically switches to

the secondary clock source if the primary clock fails.

Syntax: set {clock1|clock2} {source}

Example: set clock1 a:1

To set the primary master clock source to A:1.

Example: set clock2 1:2

Set the secondary master clock source to Quad T1 in slot 1 source selected.

{clock1}

Set primary master transmit clock source.

{clock2}

Set secondary master transmit clock source.

{source}

Set the clock source to one of the following:

NOTE: To set DS3 clocking see set (ds3) clock command.

set date

Use the set date command to set the date.

Syntax: set date {mm/dd/yyyy}

Example: set date 1/1/2002

The example will set the date to January 1, 2002.

{mm/dd/yyyy}

bits1_t1 Select BITS1 T1

bits2_t1 Select BITS2 T1

bri-addr Clock recovered from the BRI port on the BRI card (BRI card must be in

LUNT and 3DS0 mode)

ds1-addr Clock recovered from the DS1 receiver

internal Internal stratum 4E oscillator

mm Represents the month. Range is 1-12, single digits can be entered.

dd Represents the Day. Range is 1-31, single digits can be entered.

yyyy Represents the year. Range is 1999-2106.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 567 568

Comentarios a estos manuales

Sin comentarios

Carrier Access Network Device Axxius 800 Manual de usuario Pagina 175

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Carrier Access Network Device Axxius 800