Carrier Access Network Device Axxius 800 Manual de usuario Pagina 318

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 568
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 317
5-218 Axxius 800 - Release 2.2
CLI Commands
show
show (router-wan) static nat address
The show (router-wan) static nat address command displays the current static NAT address
entries for the specified WAN interface.
Syntax: show {rtr_card-addr} {"wan-name"} static nat address
Example: show 5 "LosAngeles" static nat address
> show 5 "RemoteUnit" static nat address
SLOT 5:
WAN Static NAT Address Settings for RemoteUnit:
Total: 0
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
show (router-wan) stp
The show (router-wan) stp command displays the current Spanning Tree Protocol settings for
the specified WAN interface.
Syntax: show {rtr_card-addr} {"wan-name"} stp
Example: show 5 "LosAngeles" stp
> show 5 "LosAngeles" stp
SLOT 5:
WAN Spanning Tree Protocol Settings for LosAngeles:
Spanning Tree: Enabled
Port Cost: 651 seconds
Port Priority: 128 seconds
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
Vista de pagina 317
1 2 ... 313 314 315 316 317 318 319 320 321 322 323 ... 567 568

Comentarios a estos manuales

Sin comentarios