Carrier Access Network Device Axxius 800 Manual de usuario descargar pdf (Pagina 226)

100

101

5-126 Axxius 800 - Release 2.2

CLI Commands

set

set (router) ppp auth byremote user

Syntax: set {rtr_card-addr} ppp auth byremote user

{profilename|"protocol-name"}

Example: set 5 ppp auth byremote user profilename

The example will set the PPP authentication user name for the Router in slot 5

to equal the profile name.

Note: A set (router) ppp auth byremote protocol command must be

completed before this command can be implemented.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{profilename|"protocol-name"}

set (router) ppp auth ofremote protocol

Syntax: set {rtr_card-addr} ppp auth ofremote protocol

{chap|none|pap}

Example: set 5 ppp auth ofremote protocol none

The example will set the Router in slot 5 to not allow PPP authentication of this

Axxius by the Router.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{chap|none|pap}

profilename Use the profile name as the CHAP or PAP user name.

"protocol-name" The CHAP or PAP user name. A maximum of 16 characters,

enclosed in quotes.

chap Set to the CHAP protocol.

none The remote PPP device cannot authenticate this Axxius (default).

pap Set to the PAP protocol.

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 567 568

Comentarios a estos manuales

Sin comentarios

Carrier Access Network Device Axxius 800 Manual de usuario Pagina 226

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Carrier Access Network Device Axxius 800