Carrier Access Network Device Axxius 800 Manual de usuario descargar pdf (Pagina 79)

Axxius 800 - Release 2.2 4-7

Configuration

Basic System Setup

Set Up a DS3

Use the following commands to set up a DS3. See the set (ds3) command for more

details.

Command Description

set {ds3-addr} up Activate the port.

set {ds3-addr} id

{"id-name"}

Set the DS3 ID.

set {ds3-addr} clock

{loop|normal}

Set the transmit clock source.

set {ds3-addr} berthreshold

{value}

Set the Bit Error Rate protection switchover

threshold.

set {ds3-addr} dejitter

{off|on}

Set the De-jitter buffer on or off.

set {ds3-addr} equipment id

{"string"}

Set the DS3 equipment PMDL ID string.

set {ds3-addr} facility id

{"string"}

Set the DS3 facility PMDL ID string.

set {ds3-addr} frame

{"string"}

Set the DS3 frame PMDL ID string.

set {ds3-addr} framing

{cbit|m23}

Set the framing option for the DS3.

set {ds3-addr} location id

{"string"}

Set the DS3 location PMDL ID string.

set {ds3-addr} portnum

{"string"}

Set the DS3 port number PMDL string.

set {ds3-addr} gennum

{"string"}

Set the DS3 generation number PMDL

string.

set {ds3-addr} loopdetect

{off|on}

Set the detection/reaction to CSU

loopcodes.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 567 568

Comentarios a estos manuales

Sin comentarios