Carrier Access Network Device Axxius 800 Manual de usuario Pagina 347

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 568
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 346
Axxius 800 - Release 2.2 5-247
CLI Commands
status
status (router) ip address table
Use the status (router) ip address table command to display the current IP address table
for the specified TSR card.
Syntax: status {tsr_card-addr} ip address table
["profile-name"]
Example: status 5 ip address table
> status 5 ip address table
ROUTER BLADE IP ADDRESSES REPORT Slot-5
Axxius50 has learned 2 IP Addresses from 1 Port.
Display: <IP Address > Learned From: <All Ports >
Port Name IP Address MAC Address
1. Local LAN Static 120.0.0.10
2. Local LAN Direct 192.168.3.196 00E09701E574
Example: status 5 ip address table "Axxius50"
> status 5 ip address table "Axxius50"
ROUTER BLADE IP ADDRESSES REPORT Slot-5
Axxius50 has learned 2 IP Addresses
Display: <IP Address > Learned From: <Local LAN >
IP Address MAC Address
1. Static 120.0.0.10
2. Direct 192.168.3.196 00E09701E574
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
["profile-name"]
The profile name for the TSR interface that is used to reach this destination. Name must be
enclosed in quotes, with a maximum length of 11 characters.
Vista de pagina 346
1 2 ... 342 343 344 345 346 347 348 349 350 351 352 ... 567 568

Comentarios a estos manuales

Sin comentarios